Edit Interface
How to Edit?
There are three different ways to edit an interface on a TR7 ASP device.
- 1 - Through the TR7 ASP web interface, after navigating to Network > Interfaces click on Actions > Edit Interface from the top menu to open the editing form for the interface selected on the left side.
- 2 - Through the TR7 ASP web interface, after navigating to Network > Interfaces click on a desired interface and then click on the Actions > Edit Interface button located at the top right of the pane that opens on the right to open the editing form for the selected interface.
- 3 - Through the TR7 ASP web interface, after navigating to Network > Interfaces right-click on a desired interface and then click on the Edit Interface button from the pop-up menu to open the editing form for the selected interface.
Interface
Interface Editing Form
As described in the "How to Edit?" section, follow one of the Interface Editing steps to open the interface editing form and edit the selected interface on the TR7 ASP.
Type > ETH (Pyhsical)
Warning
The form below provides an example of the editing screen for a ETH (Pyhsical) interface added on the TR7 ASP device. The information provided when adding interfaces later (VLAN, LACP, etc.) can be edited when their editing forms are opened.
- System ID
The system ID of the interface on TR7 is displayed. It cannot be changed.
- Type
The type of the interface is displayed. It cannot be changed.
- Route Table
The Route Table to which the interface belongs can be changed.
- VIP Communication
On TR7 devices configured in a cluster structure, VIP addresses can be defined on interfaces. The Master/Slave status of the same IP address on the devices with VIP addresses is determined while adding the VIP address. The network health check (heartbeat) determines on which device an IP address will be Master/Slave, based on the VIP Communication IP address selected on the interface where the IP address is defined.
- VIP Transition Duration
The time (in seconds) to wait for a change in the Master/Slave status after the health check over VIP communication IP addresses is selected.
- VIP Transition Method
Selection is made for the mechanism on which the VIP health check will be performed.
Using the VRRP protocol, if the ARP broadcast from the Master IP address is interrupted, the Backup IP address transitions itself to the Master status.
If the link to the interface is lost, it switches the IP address defined as Backup on the same interface that has the link to the other device to Master status.
According to the monitoring of the Gateway defined in the Route Table to which the interface is connected, it switches the IP address of the interface on the Route Table that cannot reach the Gateway to the Master status on the other device.
TR7 switches the IP address of the interface that fails one of the Link and Gateway checks to Master status on the other device.
- Interface Name
The name of the interface determined during the setup phase is displayed. It cannot be changed.
- Details
Activate the Details button to use the feature listed below.
o TCP Acceleration
Ensures that each new TCP connection is passed from Kernel Space to User Space.
- Edit Interface
Click the Edit Interface button to edit the relevant interface.