Network

Network is the section where the physical and logical network configuration of the TR7 device is managed centrally. From the monitoring of interface traffic to logical interfaces, from IP addresses to static and dynamic routing, and from isolated network zones to the firewall, all settings that determine the device's traffic flow are gathered under this heading.

The physical interface (NIC) inventory, the number of SR-IOV virtual functions (VF), and the cluster synchronization interface are managed not in this section but on the Hardware Management screen.

This section provides single-point access to the creation, addressing, routing, and protection of network interfaces for single-device (standalone) and two-device (cluster) setups.

Dashboard

Interface traffic

Traffic, packet, and error charts per interface

Interfaces

Standalone & Cluster

Interface, IP address, static routing, and route table operations

Route Tables

Isolated network zones

VRF-like isolation, a default gateway per table, and dynamic routing

Firewall

L4 stateful

Packet-based, rule-based, and stateful traffic inspection

Sections

Interfaces - Dashboard

The dashboard that shows the bandwidth, packet, and error charts of a single network interface; the Summary, Traffic, Packets, Errors, and Notifications tabs. In a cluster setup the default source is Both Devices.

→

Interfaces (Standalone)

Network interfaces, IP addresses, static routing, and route table configuration for a single-device setup.

→

Interfaces (Cluster)

VIP-based interface, IP, and routing management for a two-device setup; synchronization and failover between devices.

→

Firewall

Embedded L4 stateful firewall; traffic inspection with protocol, source/destination, and NAT (SNAT/DNAT) rules.

→

Route Tables

Management of route tables that create isolated network zones; a default gateway per table and dynamic routing.

→